Pontoon Boat Model

There should be a mfg. ID plate mounter on the steering console that will have this info. Also the USCG test pontoon boats and establish the capacity and HP ratings. I couldn't find your model but something close. 1500 LBS and 35HP. I'm unsure of engine weight and fuel count in Cap. but I thing it does. More info might help, like what engine you have or fuel cap. etc, or a photo>>>

2008-05-31 09:30:38 by Lee B

The 2011 model years marks Manitou's 25th year of business. To celebrate this milestone Manitou is offering the finest boat in the pontoon ...

I own a 24 ft pontoon boat and it say RVR on the title as make and model. what does that mean, it also has AL under that..

Runway Visual Range


Runway Visual Range
(RVR) is a term used in aviation meteorology to define the distance over which a pilot of an aircraft on the centreline of the runway can see the runway surface markings delineating the runway or identifying its centre line. It is normally expressed in feet or metres.
It is used as one of the main criteria for minima on instrument approaches, as in most cases a pilot must obtain visual reference of the runway to land an aircraft. The maximum RVR reading is 2,000 metres or 6,500 feet, above which it is not significant and thus does not need to be reported. RVRs are provided in METARs and are transmitted by air traffic controllers to aircraft making approaches to allow pilots to assess whether it is prudent and legal to make an approach.
Originally RVR was measured by a person, either by viewing the runway lights from the top of a vehicle parked on the runway threshold, or by viewing special angled runway lights from a tower at one side of the runway. The number of lights visible could then be converted to a distance to give the RVR. This is known as the human observer method and can still be used as a fall-back.
Today most airports use Instrumented Runway Visual Range or IRVR, which is measured by devices called transmissometers which are installed at one side of a runway relatively close to its edge. Normally three are provided, one at each end of the runway and one at the mid-point.
al might mean aluminium?
not sure it has any connection to the boat lol

2007-08-29 18:37:58 by Nancy @ Jack

Price: $499.99 $225.00

Storage bag, trailering straps, transom flap tie-down and two stern-fit elastic cords included
Fabric coating technology and heavy-duty fabric for maximum water resistance and repellency
Dual air vents reduce inside moisture and ballooning of cover at high speeds

Here`s a novel idea . Just type it in to your search engine.

2008-08-04 11:22:31 by lkshebeshekong

Family-sized 180 square inch cooking surface
Fully adjustable 10,000-BTU even-heating grill burner
Folding WindBlock system shields burners from wind for maximum heat and cooking efficiency, or fold down for convenient side trays

i'm really into r/c boats, cars, planes, etc.
and i like to make scale models of stuff like that, and i want to build an r/c pontoon boat; to do that i have to make it float, and i don't know how, to make my own pontoon tubes, or where I can buy any, so i'm wondering how to make my own. if you can tell me how to make the tubes the boat floats on, or give me a link to a website that sells them, or any ideas you might have, please let me know. ur help would be very much appreciated. thanks for your help. :)

Use wooden dowels, shaped accordingly. A soft light wood like pine or cedar would be ideal. Balsa wood or foam would also work.

2009-04-01 20:58:32 by Daniel L

need a schematic for this boat. Can anyone point me in the direction of who would have one. The dealer no longer publishes them.

Was in the biz for many years, dang few boat manufacturers even publish schematics. Basically you have a boat system and a motor system. Motor schematic would be easier to come by.
What sort of symptoms? Perhaps I can help.

2007-07-03 16:15:52 by Peter K