Boat Trailer Guide Pads

I just bought an 88 sea nymph the trailer is a shore lander with the adjustable winch "stand" it is a slide type trailer with a small oval "pad" that guides the keel the guy I got it from had it set so the boat rode on that pad while trailering and this caused 4 rivets to be worn completely down to nothing causing a leak. I replaced the rivets and the boat is now water tight question is was the original intent for the bow to ride ONLY on the bow roller where the winch ties in and keep the less robust keel portion off that pad while trailering???

So I like to set my snubber so it is just above the bow eye, but the cutwater comes in snug. The cable or the strap comes under the snubber, usually through a hole and attaches to the bow eye.

So it sounds like you need to move your winch stand closer and lift your snubber just a bit.

2009-04-20 20:39:42 by Obama is a douchenozzle

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. First ...