Boat Cover
SUPER QUALITY TRAILERABLE BOAT COVER SIZE: 17'-19' Center Console Boat with a Beam Width up to 98"
(Misc.) Elite
All Weather indoor and outdoor protection:Our high-quality cover is water resistant, breathable and provides a great protection from: sun, dust, dirt, mold, mildew, snow, rain and other corruptive elements.
Color: Gray Heavy-duty 12.5 oz polyester marine canvas for durability and weather resistance
Integrated buckle and strap system for easy fitting and trailering. Comes with convenient Storage Bag
Answers
I want to buy a T-Top cover that also covers the leaning post / bait well for a Pioneer 197 Center Console. I am having a difficult time locating a dealer, any suggestions?
savmitch1, I found a huge list of boat dealers. I think someone in your hometown can help assist you. http://www.boatsmap.com Just phone one of them or drop by one day when you are not busy. Many boat dealers can even arrange a test drive.
The Shadow Top (www.ShadowTop.com) by RNR-Marine is a universal T-Top for your center console boat, that install in minutes on your windshield ...
nothing out of the ordinary except for a four foot extended center console bar.
20' Deck length, or 20' Overall length, that includes bow rails and other over hangs.
The center console is extra, for a custom fit one.
Just figure it this way, material, good Sunbrella, $44.00 +- by state.
Beam figures in also, I guess is a trailerable so is 8' max Beam.
20'x8'=160sq ft.
That stuff is sold in yards.
Then you need Thread, good thread, go cheap with the thread and the cover will last 6 months, maybe.
Add te Center Console, add 20sq ft.,
180sq ft.
Get an estimate in your area, that is always the best bet. Also get advise from other boaters on wich Upholsterer does good work and which ones do not.
I would charge about $500-$3000 for that as it is site unseen and I have no idea how many Stanchions it may need , usually 4 does it.
Price:
$48.99
$28.93
Fits consoles up to 40W x 30L x 44H (inches)
Folds easily for storage
I'm installing a Stereo in my boat and i want to run my speaker wires from my center console on the floor to my seat cooler that i sit on..I am using the seat cooler as an Enclosure...Is there something I can use to cover the wires up ?
Thanks
Conduit or channel. It is not a good plan to have wiring on top of a deck, a false deck can be fitted in that area between the console and the seat with gently angled edges to eliminate tripping hazards. Your wires can be run under this in conduit to eliminate abrasion and any water contact - if you make the false floor sealed or allow water under it is up to you - but if you choose the latter it must be easily removed for cleaning.
Price:
$58.99
$35.46
Folds easily for storage
Fits consoles up to 46W x 40L x 45H (inches)
2001 Tracker Targa 17ft 4inches Deep "V" Big water w/ 4 Stroke 75 hp Mercury. Comes with Trailer, ores, night lights, gages (fuel, speedometer, tachometer, voltmeter, water pressure, and trim), walk through windshield, side storage, Dual Console, 30 gallon built-in tank(you won't have to fill up, it has plenty already-FULL), 2 bait wells, divided acrated 50" livewell w/ flow-rite aeration timers and remote drain controls, Tracker 12 volt 52 LB thrust 50" foot-controlled trolling motor, Radius tempered glass walk-thru windshield, AM/FM cassette stereo, extra-wide carpeted gunnels for large downriggers, aft aerated livewell, 2 large aerated baitwells w/ liftout stainer, in floor storage, storage shelf under console, all welded hull, bow storage, bow panel w/ trim recirculation and courtesy light switches, locking storage on console, wheel lug locks on trailer tires and spare tire, lock for swing away tongue, and lock so people can't drive away with it. Also comes with boat cover, battery charger, plus 4 seats that can be removed (can be moved to the front or back for easy fishing and to be able to get the anchor which there are two for different bottoms) plus all weather stand up Convertible top w/ side and aft curtains, side lockable storage for up to 7ft fishing rods, ship to shore radio with extra high atten.(Horizon-Standard VHF Marine Radio model #GX1265S Plus portanle ICOM Waterproof VHF Marine Radio model #IC-M2A) Garmin GPS Map 172C Color GPS Cahrt Plotter, Ritchie X-15 and Ritchie S53 surface mount lighted compasses, 3 Sospenders High Performance Inflatable Life Vests, tilt steering wheel, cup holders, ski storage, glove box, gas fill vent combo, hand rails, 2 60 watt speakers, and safety features. Has not been on water for 2 years. Has been shrink-wrapped and winterized each year. I have never been on a more stable boat. 37 mph top speed. It was designed for big water. Many extras that did not come with the boat. Cash or certified bank from local bank. (the picture of the deep V 18 is just like the 17ft but one foot longer both are Deep V)
Maybe you need to put an add in the local paper, or on EBay, or Craig's List.
Maybe place it along side a busy road with a 'For Sale' sign on it.
By the looks of the question you are trying to use the questions section to list your boat for free.
I am sure there are lots of boaters that have this happen all the time with their boats - even when they are covered, as long as they are left outside for an extended period of time, uncovered or not, the white fiberglass develops a layer of dirt/grime and also spots of black mold where moisture collects. Having been a very rainy humid summer here, my boat sat out in a dirt storage yard (uncovered, I know DUH stupid) - for about 2 months - it is an open center console fishing boat about 20' long, plain white fiberglass interiror, center console, seat in front and behind the console. Typical layout. But the ENTIRE surface of the interior is just covered with a nasty dirty layer of black grime, dirt and mold now. Its a friggin' mess. I know I can just start with the hose and scrub brush an inch at a time, but is there ANY way to safely spray some prep cleaner solution on the entire interior and let it soak in and start disolving some of this mold/grime. I know I can maybe use some kind of cleanser, hot water, and bleach in the water - but with the gelcoat still being new on this boat, and the soft vinyl covered white seat cushions, I hesitate to use too strong of a cleanser or too much bleach since its so easy to damage the surfaces permanently. Any suggestions would be appreciated. Its a balancing act between getting this grime off, and not damaging sensitive surfaces like gelcoat and vinyl upholstry. This is surely one of the most common cleaning challenges everyone with a boat has from time to time - any help is greatly appreciated !!!
I have usually stuck with the bleach, esp when mold is involved. Some mildew sprays like x-14 have bleach in them and are very strong. Clorox clean-up with bleach (the green one, not the blue one) works wonders and I have never had an issue with it on old or new gelcoat. Spray it on, leave it for about 30 sec to a min then use a clean wet rag to get all the gunk off, then hose off. Work in sections, it wont take that long. save the brush for the really bad areas, then go back over with the rag
rinse the whole thing out good first, then you might start with a mild cleaner like 409, spray nine, or fantastic orange, that will clean most of it, save the stronger ones like full strength simple green or the bleach for the tough areas and the mold.
I have had no issue with the vinyl and the bleach spray as long as you don't let it sit more that 30 sec to a min, and since yours are white, you should be good.
Buy Cheap
Hot Deals off on Cabela's Ratchet Lok Boat CoversCenter Console ...
The elements can take a toll on outdoor equipment, especially boats and boat covers that are constantly exposed to weather extremes. This model fits center console boats with windshield heights up to 24″. Includes seperate motor cover. Our Ratchet Lok Boat Covers are built to take on the weather and keep your watercraft protected for many seasons to come. We build these covers out of 600denier, highdensity, pigmentcoated polyester that is resistant to mildew, abrasion, water penetration and UV rays. Seams are doubleneedlestitched with tough polyester thread and fully reinforced in major stress areas including the bow, stern and windshield. Three removable quickrelease mooring straps on each side help eliminate stress and rub areas that could damage your boat’s finish. All covers come complete with heavyduty web strapping sewn into the hem, and two heavyduty ratchets at the stern for a secure fit. Colors: Charcoal, Navy.
News
Nintendo giving DSiWare EJ Puzzles: Hooked, Petz Catz Family, Surfacer+TechShout! - Jan 12, 2011
Whether DSi console owners like fish or fish only when it's meant to feed the family cat, Nintendo has lined up a trio of fun titles this time around. and more »
Winding Road Magazine - Jan 10, 2011
The front passenger area is bordered by a surface curving elegantly from the armrest over the side edge of the centre console, upwards and outwards into the and more »Operation Sports - Jan 05, 2011
If you want to do the same thing over and over again, flail your boat across the screen and explode on random barrels of TNT then this game is for you.
Leagle.com - Dec 31, 2010
On the way, Salazar noticed there was blood on the passenger side door handle, the passenger side window, the center console, and the steering wheel. and more »Washington Post (blog) - Dec 28, 2010
It is a waste of the presidential bully pulpit and it is a shameful, shameful use of presidential gravitas to console a man who was so terribly selfish and and more »


TAYLOR MADE BOAT CENTER CONSOLE COVER FOR T TOP BOATS
17'-19' Center Console Boat Cover,Straps & Warranty,New
Cape Craft 22WI Center Console Fishing T-Top Hard-Top Fishing Boat Cover Blue
COVER 23' V-HULL CENTER CONSOLE FISHING BOAT WITH BOW RAILS - BLACK - USA MADE!
BOAT COVER- 24' DECK BOAT with WINDSHIELD OR SIDE CONSOLE MADE IN THE USA